1. Place greasy hardware, aluminum blocks, metals, bearings, chains, molds, etc. into a cleaning basket and then into a cleaning tank

2、加水并倒入一定量的脫脂劑

2. Add water and pour in a certain amount of degreaser

3、按下開關，超聲波清洗機開始工作，清洗一段時間后，再放入另一個干燥槽干燥，干燥一段時間后，取出物體，清洗籃。

3. Press the switch, the Ultrasonic cleaning starts to work. After cleaning for a period of time, put it into another drying tank for drying. After drying for a period of time, take out the object and clean the basket.

4、停機，注意維護

4. Shutdown, pay attention to maintenance

使用超聲波清洗機可以縮短除油除銹時間，提高除油除銹質量，強化除油除銹工藝。特別適用于零件和復雜硬件零件。表面難以除油和油脂的金屬、軸承、鏈條和模具具有明顯的除油和除銹效果，克服了人工清洗對零件造成的損壞。超聲波除油基于空化原理，超聲波頻率40KHz為高頻超聲波。在超聲波作用下，加上除油劑的化學作用，產生氣泡的瞬間，由于受到壓力的作用，氣泡壓縮破碎而分散，同時產生沖擊波，這種沖擊波可以清洗五金零件表面，使污垢脫落。

The use of Ultrasonic cleaning can shorten the time of oil and rust removal, improve the quality of oil and rust removal, and strengthen the oil and rust removal process. Especially suitable for parts and complex hardware parts. Metals, bearings, chains, and molds that are difficult to remove oil and grease on the surface have obvious oil and rust removal effects, overcoming the damage caused by manual cleaning to parts. Ultrasonic oil removal is based on the principle of cavitation, and the ultrasonic frequency of 40KHz is high-frequency ultrasonic. Under the action of ultrasonic waves and the chemical action of degreasing agents, bubbles are generated at the moment. Due to the pressure, the bubbles are compressed and dispersed, and at the same time, shock waves are generated. This shock wave can clean the surface of hardware parts and cause dirt to fall off.

超聲波清洗機的除油除銹效果如何？事實上，除油除銹的效果與零件的尺寸、形狀復雜度、零件的位置、表面的油成分、是否添加脫脂劑密切相關。正常情況下，超聲波清洗機油和除銹頻率為40KHz。零件的放置非常重要。零件在清洗槽中轉動或旋轉，使表面的每個部分都能受到超聲波輻射的影響，從而達到更好的清洗效果。

How effective is the Ultrasonic cleaning in removing oil and rust? In fact, the effectiveness of oil and rust removal is closely related to the size, shape complexity, position of the parts, oil composition on the surface, and whether degreasing agents are added. Under normal conditions, the frequency of ultrasonic oil cleaning and rust removal is 40KHz. The placement of parts is very important. The parts rotate or rotate in the cleaning tank, allowing each part of the surface to be affected by ultrasonic radiation, thereby achieving better cleaning results.

超聲波清洗機與超聲波清洗劑一樣，洗衣機與洗衣粉一起使用，清洗效果大大提高，

The Ultrasonic cleaning is the same as the ultrasonic cleaning agent. The washing machine and washing powder are used together to greatly improve the cleaning effect,

本文由通過式噴淋清洗機友情奉獻.更多有關的知識請點擊: http://www.qdnggxh.com  真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is dedicated to the friendship of the through type spray cleaning machine. For more relevant knowledge, please click on: http://www.qdnggxh.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned